S-HARD
S-HARD
S-HARD end mill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel series.
2WCB
Standard Ball
Carbon Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper
2Flutes Ball Endmill
- - Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40 ~ 62)
- - Dividing and double flute make it easy to prevent shaking and chip ejection.
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
2WSB
Short Ball
Carbon Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper
2Flutes Short Ball Endmill
- - Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40 ~ 62)
- - Dividing and double flute make it easy to prevent shaking and chip ejection.
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
2WCE
Square Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels
2Flutes Standard Endmill
- - Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40 ~ 62)
- - Dividing and double flute make it easy to prevent shaking and chip ejection.
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
4WCE
Square Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels
4Flutes Standard Endmill
- - 4Flutes Standard Endmill
- - Dividing and double flute make it easy to prevent shaking and chip ejection.
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
2WCR
Rib Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels
2Flutes Corner Radius Endmills
- - Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40 ~ 62)
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
- - Various size of Corner Radius is applied for protection from chipping.
4WCR
Rib Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels
4Flutes Corner Radius Endmills
- - Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40 ~ 62)
- - Dividing and double flute make it easy to prevent shaking and chip ejection.
- - Enables high performance milling in tough steels, low alloyed steels, high alloyed steels and hard to cut materials.
- - Various size of Corner Radius is applied for protection from chipping.
4&6BNR
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
4BCE
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
