ENG
KOR
ENG
ENG

PRODUCTS

HOME  /   PRODUCTS

PRODUCTS

K-DRILL

K-DRILL provides optimal performance for processing automobile parts such as S45C, SCM, cast steel, and cast iron. There are carbide drill, long drill, flat drill and flat long drill types.

K-DENTAL

K-DENTAL endmill is always in ex-stock and it is easy to process with various equipment and materials such as zirconia, cobalt nickel, and titanium.

S-HARD

S-HARD endmill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel series.

K-CBN

K-CBN endmill is capable of high-precision machining of high-hardness steel below HRC90 and guarantees a long tool-life.

B-HARD

B HARD endmill is coated with Tisin-S to maximize wear resistance and to provide powerful cutting forces for high speed and efficiency.

K-HARD

K-HARD endmill provides high precision and excellent roughness surface between HRC 45 and 62 for processing high hardness and mold steel materials.

K-SPEED

K-SPEED endmill promises optimal machining with various sizes and shapes of high hardness steel between HRC45 and 52.

K-COPPER

K-COPPER is an endmill suitable for processing copper, copper alloy, and non-ferrous alloy.

K-GRAPHITE

K-GRAPHITE is a dedicated endmill that processes various work-pieces such as graphite, carbon fiber, non-ferrous, and non-metallic materials.

K-COMPOSITE

K-COMPOSITE is an endmill dedicated to non-ferrous, non-metallic composite materials such as reinforced plastic, CFRP, GFRP, and glass/carbon fiber.

K G-TAC

K G-TAC is an endmill with the new concept coating for processing efficiency on aluminum, copper, and plastic.

K-SUS

K-SUS is the optimal endmill for roughing of difficult to cut materials such as SUS series, alloy steel, and Inconel.

K-MULTI

K-MULTI shows excellent efficiency in processing mild steel, cast iron, and SUS series of low and medium hardness steel HRC42 or lower by applying unequal division and variable helix.

K-ALUMINUM

K-ALUMINUM endmill is for Aluminum, AL alloy, non-ferrous non-metallic materials.

K-ABS

K-ABS is an endmill dedicated to non-ferrous and non-metallic workpieces such as acrylic, ABS, mock-up, and aluminum.

K-TAPER

K-TAPER is prepared as a tapered ball endmill for impeller processing and for taper processing of high hardness steel of over HRC50.

K-GENERAL

K-GENERAL is an endmill that can perform various types of processing depending on the processing shape.

K-BLUE

K-BLUE is a cost-effective product that applies TISIN-S coating to process medium and low hardness steel materials below HRC52.

K-GSERIES

K-GSERIES is a cost-effective product for processing mild hardness steel materials below HRC52.

K-THREADMILL

K-THREADMILL has a variety of product lines for each material for precision screw processing in machining centers.