K-TAPER
K-TAPER
- 4&6TDBE
- 3ITBD
- 2TBM
- 2TEM
- 4TEM
- 4TRE
K-TAPER
- 4&6TDBE
- 3ITBD
- 2TBM
- 2TEM
- 4TEM
- 4TRE
탭 콘텐츠
K-TAPER
K-TAPER is prepared as a tapered ball endmill for impeller processing and for taper processing of high hardness steel of over HRC50.
4&6TDBE
4&6 Flutes 5Axies Taper Double Ball Endmills
- - Pre-hardened steel, Cast iron, Non-metallic materials
- - Suitable for special components with 3 axes and 5 axes sector such as impellers, blisks, tire profiles, turbine blades.
- - Available for simultaneous machining of roughing and finishing with only one tool.
2TBM
3 Flutes Taper Ball Endmills for Impellers
- - Pre-hardened steel, Cast iron, Non-metallic materials
- - Suitable for special components with 3 axes and 5 axes sector such as impellers, blisks, tire profiles, turbine blades
- - Available for simultaneous machining of roughing and finishing with only one tool.
2TBM
2 Flutes Taper Ball Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
2TEM
2 Flutes Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
4TEM
4 Flutes Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
4TER
4 Flutes Rib Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - Optimum for deep grooving by 2bottom edge with 4flutes.
- - High precise edge tolerance.
- - Very nice work surface finish.
4&6BNR
Type :
Solid Drill
Flutes :
Carbon Steels, Stainless Steels
S45C, SCM, 주강, 주철 등의 자동차 부품소재 가공에 최적의 성능을 발휘함
장점
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
