K-SUS
K-SUS
K-SUS is the optimal endmill for roughing of difficult to cut materials such as SUS series, alloy steel, and Inconel.
4HSB
45° Helix Ball Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, SUS, Stainless Steels, Copper
4 Flutes 45° Helix Ball Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Excellent work surface finish by 4 flute and deep chip pocket.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3HSM
45° Helix Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, SUS, Stainless Steels, Copper
3 Flutes 45° Helix Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Excellent work surface finish by 3 flute and deep chip pocket.
- - 45° helix design for high speed, feed condition.
4NSM
Non Symmetry Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, SUS, Stainless Steels, Copper
4 Flutes Non Symmetry Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Minimize chattering by unequal flute spacing design.
- - Excellent work surface finish by 4 flute and deep chip pocket.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
2HOB
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
4NSR
Non Symmetry Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, SUS, Stainless Steels, Copper
4 Flutes Non Symmetry Corner Radius Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Minimize chattering by unequal flute spacing design.
- - Minimize chattering by unequal flute spacing design.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
4VSU
Variable Helix Endmills
Prehardened Steels, SUS, Stainless Steels, Heat treated steel, Titanum, Copper
4 Flutes Variable Helix End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Type A minimizes chipping, Type B maximizes chip emmissins.
3RBS
Prehardened Steels, SUS, Titanum, Copper
3 Flutes 45° Helix Rib Ball End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - High speed, feed applicable by 45° helix and deep chip pocket design.
4RES
Rib Endmills
Prehardened Steels, SUS, Titanum, Copper
4 Flutes Rib End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
3&4&5RRS
45° Helix Roughing Core R
Prehardend Steels, Stainless Steels, Titanum
3&4&5 Flutes 45° Helix Roughing Core R End Mills for SUS
- - Roughing Endmills for alloy steel, SUS, Inconel, Mild steel and various hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - 45° helix design for minimizing cutting resistance and long time process.
4CRS
Rib Corner Radius
Prehardened Steels, SUS, Stainless Steels, Titanum, Copper
4 Flutes Rib Corner Radius End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
4CLS
Long Length Corner Raduis
Prehardened Steels, SUS, Stainless Steels, Titanum, Copper
4 Flutes Long Length Corner Radius End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
3&4&5RRS
Long Length Corner Radius
Prehardened Steels, SUS, Stainless Steels, Titanum
Prehardened Steels, SUS, Stainless Steels, Titanum
- - Roughing Endmills for alloy steel, SUS, Inconel, Mild steel and various hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - 45° helix design for minimizing cutting resistance and long time process.
