K-BLUE
K-BLUE
- 2ECB
- 2ECE
- 4ECE
- 2ECR
- 4ECR
- 3ESE
- 4ESE
K-BLUE
- 2ECB
- 2ECE
- 4ECE
- 2ECR
- 4ECR
- 3ESE
- 4ESE
탭 콘텐츠
K-BLUE
K-BLUE is a cost-effective product that applies TISIN-S coating to process medium and low hardness steel materials below HRC52.
2ECB
2Flutes Ball Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
2ECE
2Flutes Standard Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
4ECE
4Flutes Standard Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
2ECR
2Flutes Corner Radius Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
4ECR
4Flutes Corner Radius Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Designed for minimizing edge chipping by corner R shape.
3ESE
3 Flutes Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Excellent work surface finish by 3 flute and deep chip pocket.
4ESE
4Flutes Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Minimize chattering by unequal flute spacing design.
3ESE
Type :
Endmills for Heavy cuts
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
3 Flutes Endmills for Heavy cuts
MERIT
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Excellent work surface finish by 3 flute and deep chip pocket.
4ESE
Type :
Endmills for Heavy cuts
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
4 Flutes Endmills for Heavy cuts
MERIT
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Minimize chattering by unequal flute spacing design.
