K-ALUMINUM
K-ALUMINUM
- 3AHM
- 2AHE
- 3AHE
- 3AHF
- 3AHR
- 3ARR
- 3ARM
- 3ARH
K-ALUMINUM
- 3AHM
- 2AHE
- 3AHE
- 3AHF
- 3AHR
- 3ARR
- 3ARM
- 3ARH
K-ALUMINUM
K-ALUMINUM endmill is for Aluminum, AL alloy, non-ferrous non-metallic materials.
3AHM
Type :
45° Helix Rib Endmills
Flutes :
Aluminum
3 Flutes 45° Helix Rib Endmills for Aluminum
MERIT
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Applied short flute length for various applications.
- - Minimize built up edge by double edge and deep pocket design.
2AHE
Type :
45° Helix Endmills
Flutes :
Aluminum
2 Flutes 45° Helix Endmills for Aluminum
MERIT
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Various flute length design for covering wide range application.
- - Minimize built up edge by double edge and deep pocket design.
3AHE
Type :
45° Helix Endmills
Flutes :
Aluminum
3 Flutes 45° Helix Endmills for Aluminum
MERIT
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Minimize built up edge by double edge and deep pocket design.
3AHF
Type :
Mirror Finishing Cutting Endmills
Flutes :
Aluminum, Plastic
3 Flutes Mirror Finishing Cutting End Mills for Aluminum
MERIT
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials.
3AHR
Type :
45° Helix Corner Radius
Flutes :
Aluminum, Copper
3 Flutes 45° Helix Corner Radius Endmills for Aluminum
MERIT
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Minimize built up edge by double edge and deep pocket design.
- - High speed, feed applicable by 3 flute 45°degree helix and short flute design.
3ARR
Type :
Semi Finishing & Roughing Radius
Flutes :
Aluminum, Copper
3 Flutes Semi-Finishing & Roughing Corner Radius Endmills for Aluminum
MERIT
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3ARM
Type :
Semi Finishing & Roughing
Flutes :
Aluminum, Copper
3 Flutes Semi-Finishing & Roughing Endmills for Aluminum
MERIT
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - Good surface integrity differently from competitor’s AL roughing endmills.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3ARH
Type :
45° Helix Roughing Endmills
Flutes :
Aluminum, Copper
3 Flutes 45° Helix Roughing Endmills for Aluminum
MERIT
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - High speed roughing applicable by 45°helix fine pitch flute.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
