K-ABS
K-ABS
- 1NBE
- 2NBE
- 3NBE
- 2NLB
- 2NLE
- 1NEM
- 1NRM
- 2NEM
- 3NEM
- 4NEM
- 2NRB
- 3NRB
- 2NRE
- 3NRE
K-ABS
- 1NBE
탭 콘텐츠
- 2NBE
- 3NBE
- 2NLB
- 2NLE
- 1NEM
- 1NRM
- 2NEM
- 3NEM
탭 콘텐츠
- 4NEM
탭 콘텐츠
- 2NRB
- 3NRB
- 2NRE
탭 콘텐츠
- 3NRE
탭 콘텐츠
K-ABS
K-ABS is an end mill dedicated to non-ferrous and non-metallic workpieces such as acrylic, ABS, mock-up, and aluminum.
1NBE
1 Flute Ball Endmills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and nonmetallic
- - Excellent chip removing by a helix 1flute design.
- - Optimum for cut-off and wall machining.
2NBE
2 Flutes Ball Endmills
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Very nice work surface finish.
3NBE
3 Flutes Ball Endmills
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Minimize chattering by short flute design.
- - Very nice work surface finish.
2HOB
Type :
Solid Drill
Flutes :
Carbon Steels, Stainless Steels
S45C, SCM, 주강, 주철 등의 자동차 부품소재 가공에 최적의 성능을 발휘함
장점
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
2NLB
2 Flutes Micro Long Ball Endmills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Long flute helps chip control in deep groove machining.
2NLE
2 Flutes Micro Long Endmills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Long flute helps chip control in deep groove machining.
- - Reinforced edge design for preventing edge chipping.
1NEM
1 Flute Endmills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Excellent chip removing by a helix flute design.
- - Optimum for cut-off and wall machining.
1NRM
1 Flute Reverse Edge Endmills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Downward chip direction by reverse helix design helps chip control.
- - No burr in work materials.
- - Optimum for unstable work clamping.
2NEM
2 Flutes Endmills
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Reinforced edge design for preventing edge chipping.
- - Improve tool performance by even run-out and tolerance control.
3NEM
3 Flutes Endmills
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Reinforced edge design for preventing edge chipping.
- - Minimize chattering by short flute design.
4NEM
4 Flutes End Mills
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials.
- - Reinforced edge design for preventing edge chipping.
2NRB
2 Flutes Micro Rib Ball End Mills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials.
- - Minimize chattering by short flute design.
- - Excellent tool rigidity by short flute design at high speed, feed machining.
3NRB
3 Flutes Micro Rib Ball End Mills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials.
- - Minimize chattering by short flute design.
- - Excellent tool rigidity by short flute design at high speed, feed machining.
2NRE
2 Flutes Micro Rib End Mills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials.
- - Minimize chattering by short flute design.
- - Excellent tool rigidity by short flute design at high speed,feed machining.
3NRE
3 Flutes Micro Rib End Mills
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials.
- - Minimize chattering by short flute design.
- - Excellent tool rigidity by short flute design at high speed,feed machining.
4RCR
4 Flutes Rib Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
2RCR
2Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
4CNR
4 Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and overall length for wide range application.
4HCR
4 Flutes 45° Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - Designed for minimizing edge chipping by corner R shape.
- - 45°degree helix design for high speed, feed condition.
6HCR
6 Flutes 45°Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - 45° helix design for high speed, feed condition.
- - Improved wear resistance with longer edge and excellent work surface finish in various machining applications.
4SCU
4 Flutes High Speed Corner Radius Cutter
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
6SCU
6 Flutes High Speed Corner Radius Cutter
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3&4SRM
3&4 Flutes Roughing Endmills
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
2TCR
Type :
Taper Neck Corner Radius
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes High Speed Taper Neck Corner Radius Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
4TCR
Type :
Taper Neck Corner Radius
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes High Speed Taper Neck Corner Radius Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
2DPH
Type :
Endmills for 3D Cut 230°
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes Spherical Endmills for 3D Cut 230°
MERIT
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPH
Type :
Endmills for 3D Cut 230°
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 230°
MERIT
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPM
Type :
Endmills for 3D Cut 270°
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 270°
MERIT
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 270° ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
3&4SRM
Type :
Roughing Endmills
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes Roughing Endmills
MERIT
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
Type :
45°Helix Fine Pitch Roughing
Flutes :
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
MERIT
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
