K-BLUE
K-BLUE
K-BLUE is a cost-effective product that applies TISIN-S coating to process medium and low hardness steel materials below HRC52.
4FNR
Roughing & Finishing
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
Roughing and Finishing Endmill (4 Flutes)
- - Structure which facilitates at the same time process of roughing and finishing/4 Flutes (2flute for Roughing, 2flute for Finishing)
- - Possible to process roughing and finishing at the same time/ Reduce time for setup (Improve Productivity)
- - Designed to suppress vibraiton during semi-roughing/ Reduce noise
4FCE
Roughing & Finishing
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
Roughing and Finishing Endmill (4 Flutes)
- - Designed to suppress vibraiton during semi-roughing/ Reduce noise
- - Possible to process roughing and finishing at the same time/ Reduce time for setup (Improve Productivity)
- - Designed to suppress vibraiton during semi-roughing/ Reduce noise
2ECB
Ball Endmills for heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Heat treated steel, Copper
2Flutes Ball Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
2ECE
Standard Endmills for heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Heat treated steel, Copper
2Flutes Standard Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
4ECE
Standard Endmills for heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Heat treated steel, Copper
4Flutes Standard Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Suitable shape is designed for tooling in wide areas.
2ECR
Corner Radius for heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Heat treated steel, Copper
2Flutes Corner Radius Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
- - Designed for minimizing edge chpping by corner R shape.
4ECR
Corner Radius for heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Heat treated steel, Copper
4Flutes Corner Radius Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel
- - Good wear resistance by high quality Si-based PVD coating.
3ESE
Endmills for Heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
3 Flutes Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Excellent work surface finish by 3 flute and deep chip pocket.
4ESE
Endmills for Heavy cuts
Carbon Steels, Alloy Steels, Prehardened Steel, Stainless Steels
4 Flutes Endmills for Heavy cuts
- - Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel,SUS, Ti/Ni-base alloy, Inconel
- - Good wear resistance by high quality Si-based PVD coating.
- - Minimize chattering by unequal flute spacing design.
