K-TAPER
K-TAPER
K-TAPER is prepared as a tapered ball endmill for impeller processing and for taper processing of high hardness steel of over HRC50.
3ITBD
Taper Ball for Impeller
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper, Graphite
3 Flutes Taper Ball Endmills for Impellers
- - Pre-hardened steel, Cast iron, Non-metallic materials
- - Suitable for special components with 3 axes and 5 axes sector such as impellers, blisks, tire profiles, turbine blades
- - Available for simultaneous machining of roughing and finishing with only one tool.
2TBM
Taper Ball Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper, Graphite
2 Flutes Taper Ball Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
2TEM
Taper Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper, Graphite
2 Flutes Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
4TEM
Taper Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper, Graphite
4 Flutes Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Very nice work surface finish.
4TRE
Rib Taper Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel, SUS, Stainless Steels, Copper, Graphite
4 Flutes Rib Taper Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - Optimum for deep grooving by 2bottom edge with 4flutes.
- - High precise edge tolerance.
- - Very nice work surface finish.
4WCR
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
4&6BNR
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
