K-ABS
K-ABS
- 2NBE
- 3NBE
- 2NLB
- 2NLE
- 1NEM
- 1NRM
- 2NEM
- 3NEM
K-ABS
- 2NBE
- 3NBE
- 2NLB
- 2NLE
- 1NEM
- 1NRM
- 2NEM
- 3NEM
K-ABS
K-ABS is an end mill dedicated to non-ferrous and non-metallic workpieces such as acrylic, ABS, mock-up, and aluminum.
2NBE
Type :
Ball Endmills
Flutes :
Aluminum, Copper, Plastic
2 Flutes Ball Endmills
MERIT
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Very nice work surface finish.
3NBE
Type :
Ball Endmills
Flutes :
Aluminum, Copper, Plastic
3 Flutes Ball Endmills
MERIT
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Minimize chattering by short flute design.
- - Very nice work surface finish.
2NLB
Type :
Micro Long Ball
Flutes :
Aluminum, Copper, Plastic
2 Flutes Micro Long Ball Endmills
MERIT
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Improve tool performance by even run-out and tolerance control.
2NLE
Type :
Micro Long Endmills
Flutes :
Aluminum, Copper, Plastic
2 Flutes Micro Long Endmills
MERIT
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Improve tool performance by even run-out and tolerance control.
- - Long flute helps chip control in deep groove machining.
- - Reinforced edge design for preventing edge chipping.
1NEM
Type :
Endmills
Flutes :
Aluminum, Copper, Plastic
1 Flute Endmills
MERIT
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Excellent chip removing by a helix flute design.
- - Optimum for cut-off and wall machining.
1NRM
Type :
Reverse Edge Endmills
Flutes :
Aluminum, Copper, Plastic
1 Flute Reverse Edge Endmills
MERIT
- - Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Downward chip direction by reverse helix design helps chip control.
- - No burr in work materials.
- - Optimum for unstable work clamping.
2NEM
Type :
Endmills
Flutes :
Aluminum, Copper, Plastic
2 Flutes Endmills
MERIT
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Reinforced edge design for preventing edge chipping.
- - Improve tool performance by even run-out and tolerance control.
3NEM
Type :
Endmills
Flutes :
Aluminum, Copper, Plastic
3 Flutes Endmills
MERIT
- - Endmills for Mild steel, Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials
- - Reinforced edge design for preventing edge chipping.
- - Minimize chattering by short flute design.
