K-SUS
K-SUS
- 4HSB
- 3HSM
- 4NSM
- 4NSR
- 3RBS
- 4RES
- 4VSU
- 4CRS
- 4CLS
- 3&4&5 RRS
K-SUS
- 4HSB
- 3HSM
- 4NSM
- 4NSR
- 3RBS
- 4RES
- 4VSU
- 4CRS
탭 콘텐츠
- 4CLS
- 3&4&5 RRS
K-SUS
K-SUS is the optimal endmill for roughing of difficult to cut materials such as SUS series, alloy steel, and Inconel.
4HSB
4 Flutes 45° Helix Ball Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Excellent work surface finish by 4 flute and deep chip pocket.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3HSM
3 Flutes 45° Helix Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Excellent work surface finish by 3 flute and deep chip pocket.
- - 45° helix design for high speed, feed condition.
4NSM
4 Flutes Non Symmetry Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Minimize chattering by unequal flute spacing design.
- - Excellent work surface finish by 4 flute and deep chip pocket.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
2HOB
Type :
Solid Drill
Flutes :
Carbon Steels, Stainless Steels
S45C, SCM, 주강, 주철 등의 자동차 부품소재 가공에 최적의 성능을 발휘함
장점
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
4NSR
4 Flutes Non Symmetry Corner Radius Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials
- - Minimize chattering by unequal flute spacing design.
- - Preventing bottom edge chipping by corner R.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3RBS
4 Flutes Variable Helix End Mills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - High speed, feed applicable by 45˚ helix and deep chip pocket design.
4RES
4Flutes Rib Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
4VSU
4Flutes Variable Helix Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Type A minimizes chipping, Type B maximizes chip emmissins..
4CRS
4Flutes Rib Corner Radius Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
4CLS
4Flutes Long Length Corner Radius Endmills for SUS
- - Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - Strong design for protection against chattering.
3&4&5 RRS
3&4&5 Flutes 45˚ Helix Roughing Core R Endmills for SUS
- - Roughing Endmills for alloy steel, SUS, Inconel, Mild steel and various hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - 45˚ helix design for minimizing cutting resistance and long time process.
3&4&5RRS
Type :
Long Length Corner Radius
Flutes :
Prehardened Steels, SUS, Stainless Steels, Titanum
Prehardened Steels, SUS, Stainless Steels, Titanum
MERIT
- - Roughing Endmills for alloy steel, SUS, Inconel, Mild steel and various hard to cut materials.
- - JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- - 45° helix design for minimizing cutting resistance and long time process.
