B-HARD
B-HARD
B HARD endmill is coated with Tisin-S to maximize wear resistance and to provide powerful cutting forces for high speed and efficiency.
2BRB
Rib Ball Endmills
Alloy Steels, Prehardened, Heat treated steel
2 Flutes Rib Ball Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
2BCB
Standard Ball
Alloy Steels, Prehardened, Heat treated steel
2 Flutes Standard Ball Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Maximize the wear-resistance due to TiSiN-S coating.
2&3BSB
Short ball
Alloy Steels, Prehardened, Heat treated steel
2&3 Flutes Short Ball Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
2BRE
Rib Endmills
Alloy Steels, Prehardened, Heat treated steel
2 Flutes Square Rib Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
4BRE
Rib Endmills
Alloy Steels, Prehardened, Heat treated steel
4 Flutes Square Rib Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
4BCR
Rib Corner Radius
Alloy Steels, Prehardened, Heat treated steel
4 Flutes Rib Corner Radius Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
4&6BNR
Corner Radius Endmills
Alloy Steels, Prehardened, Heat treated steel
4&6 Flutes Corner Radius Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
4BCE
Square Endmills
Alloy Steels, Prehardened, Heat treated steel
4 Flutes Square Endmills
MERIT
- - Endmills for pre-hardened and hardened steel (HRC52~70)
- - Designed for high speed cutting of hardened steels over HRc52.
- - Maximize the wear-resistance due to TiSiN-S coating.
