K-ALUMINUM
K-ALUMINUM
K-ALUMINUM endmill is for Aluminum, AL alloy, non-ferrous non-metallic materials.
3AHM
3Flutes 45˚ Helix Rib Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Applied short flute length for various applications.
- - Minimize built up edge by double edge and deep pocket design.
2AHB
2Flutes 45˚ Helix Ball Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade for excellent surface finish.
- - High speed, feed applicable by 45˚ degree helix and deep chip pocket design.
2AHE
2Flutes 45˚ Helix Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Various flute length design for covering wide rage application.
- - Minimize built up edge by double edge and deep pocket design.
2HOB
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
3AHE
3Flutes 45˚ Helix Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials.
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Various flute length design for covering wide range application.
- - Minimize built up edge by double edge and deep pocket design.
3ALUC
3 Flutes 45° Helix Corner Radius Endmills for Aluminum
- - DLC coating specialized for cutting aluminum, aluminum alloys.
- - Special design for Aluminum and Aluminum alloy.
- - Excellent surface roughness and smooth chip evacuation.
4AHE
4 Flutes 38˚ Helix Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials.
- - Applied ultra fine WC frade(0.2㎛) for excellent surface finish.
- - Various flute length design for covering wide range application.
- - Minimize built up edge by double edge and deep pocket design.
3AHF
3 Flutes Mirror Finishing Cutting End Mills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials.
- - By 25° helix flute edge design with the after-treatment process, when milling workpiece, it enables superior mirror surface milling.
3AHR
3 Flutes 45° Helix Roughing Endmills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Applied ultra fine WC grade(0.2㎛) for excellent surface finish.
- - Minimize built up edge by double edge and deep pocket design.
- - High speed, feed applicable by 3 flute 45°degree helix and short flute design.
3ACB
3 Flutes Chip Breaker End Mills for Aluminum
- - Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials.
- - The powerful anti-chattering design minimizes the vibration of the end mill during side milling.
- - Excellent performance in semi-finishing and roughing by applying a double cutting edge.
- - The poket is deeply designed to minimize adsorption.
3ARR
3 Flutes Semi-Finishing & Roughing Corner Radius Endmills for Aluminum
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - Good surface integrity differently from competitor’s AL roughing endmills.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3ARM
3 Flutes Semi-Finishing & Roughing Endmills for Aluminum
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - Good surface integrity differently from competitor’s AL roughing endmills.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3ARH
3 Flutes 45° Helix Roughing Endmills for Aluminum
- - High speed semi finishing and roughing endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials
- - Minimize built up edge by chip braker and deep pocket design.
- - High speed roughing applicable by 45°helix fine pitch flute.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
4LEM
4Flutes Long Length Endmills
- - Endmills for various work materials, hardened steel, pre-hardened steel, tool steel and cast iron. (~HRC52)
- - Improve tool performance by even run-out and tolerance control.
- - Minimize edge chipping by improving corner strength.
2RCR
2 Flutes Rib Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
4RCR
4 Flutes Rib Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
2RCR
2Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
4CNR
4 Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and overall length for wide range application.
4HCR
4 Flutes 45° Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - Designed for minimizing edge chipping by corner R shape.
- - 45°degree helix design for high speed, feed condition.
6HCR
6 Flutes 45°Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - 45° helix design for high speed, feed condition.
- - Improved wear resistance with longer edge and excellent work surface finish in various machining applications.
4SCU
4 Flutes High Speed Corner Radius Cutter
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
6SCU
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3&4SRM
3&4 Flutes Roughing Endmills
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
2TCR
Taper Neck Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes High Speed Taper Neck Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
4TCR
Taper Neck Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes High Speed Taper Neck Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
2DPH
Endmills for 3D Cut 230°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes Spherical Endmills for 3D Cut 230°
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPH
Endmills for 3D Cut 230°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 230°
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPM
Endmills for 3D Cut 270°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 270°
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 270° ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
3&4SRM
Roughing Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes Roughing Endmills
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
45°Helix Fine Pitch Roughing
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
