K-MULTI
K-MULTI
K-MULTI shows excellent efficiency in processing mild steel, cast iron, and SUS series of low and medium hardness steel HRC42 or lower by applying unequal division and variable helix.
4MSB
4 Flutes Various Symmetry End Mills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Unequal pitch Ball design and helix enable decrease of chattering.
4MTR
4Flutes Trochoidal Milling Endmills
- - Roughing Endmills for alloy steel, inconel, soft stell, SUS and various hard to cut materials.
- - HR coating reduces stress of flute and enhances wear resistance.
- - Variable helix design for minimizing cutting resistance and long time process.
5&6MTR
5&6 Flutes Trochoidal Milling Endmills
- - Roughing Endmills for alloy steel, inconel, soft steel, SUS and various hard to cut materials.
- - HR coating reduces stress of flute and enhances wear resistance.
- - Variable helix design for minimizing cutting resistance and long time process.
2HOB
- - 최적의 공구강성과 최적의 칩배출을 고려한 FLUTE 설계
- - New design으로 별도의 centering과 reaming 작업이 필요없이 고정밀 작업이 가능
- - 인성과 내마모성이 우수한 초미립자 고급재질을 사용하여 공구의 수명을 향상하여 무인작업이 가능
4MSE
4 Flutes Various Symmetry Corner End Mills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Unequal pitch design and helix enable decrease of chattering.
6MSE
6 Flutes Various Symmetry End Mills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Deep hole helix design enable chip evacuation and increase surface roughness.
4MCC
4 Flutes Various Symmetry Corner C End Mills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Unequal pitch design and helix enable decrease of chattering.
5MCC
5 Flutes Various Symmetry Corner C End mills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Unequal pitch design and helix enable decrease of chattering.
4MSC
4FLutes Various Symmetry Endmills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Unequal pitch design and helix enable decrease of chattering.
6MSC
6Flutes Various Symmetry Corner Radius Endmills for steels, Cast Iron & Stainless Steels
- - Mid-low hardened steel(HRC~42), soft steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - 45˚ helix design is suitable for high speed machining.
7MUC
7Flutes Non Symmetry Coner Radius Endmills for SUS
- - Mid-low hardened steel(HRC~42), soft steel, steel, SUS
- - HR coating reduces stress of flute and enhances wear resistance.
- - Strong design for protection against chattering.
4MLE
4 Flutes High Speed Solting Endmills for SUS
- - Endmills for finishing and roughing of alloy steel,inconel, soft steel, SUS and various hard to cut materials.
- - Chip emission is excellent for slotting, and thick double core designed enables continuous machining without chattering.
- - HR coating reduces stress of flute and enhances wear resistance.
2LEM
2 Flutes Long Length Endmills
- - Endmills for various work materials, hardened steel, pre-hardened steel, tool steel and cast iron. (~HRC52)
- - Improve tool performance by even run-out and tolerance control.
- - Minimize edge chipping by improving corner strength.
4LEM
4Flutes Long Length Endmills
- - Endmills for various work materials, hardened steel, pre-hardened steel, tool steel and cast iron. (~HRC52)
- - Improve tool performance by even run-out and tolerance control.
- - Minimize edge chipping by improving corner strength.
2RCR
2 Flutes Rib Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
4RCR
4 Flutes Rib Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
2RCR
2Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and flute length for wide range application.
4CNR
4 Flutes Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - High precise edge tolerance.
- - Designed for minimizing edge chipping by corner R shape.
- - Various corner R and overall length for wide range application.
4HCR
4 Flutes 45° Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - Designed for minimizing edge chipping by corner R shape.
- - 45°degree helix design for high speed, feed condition.
6HCR
6 Flutes 45°Helix Corner Radius Long Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~)
- - 45° helix design for high speed, feed condition.
- - Improved wear resistance with longer edge and excellent work surface finish in various machining applications.
4SCU
4 Flutes High Speed Corner Radius Cutter
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
6SCU
- - Cutter for pre-hardened and hardened steel (HRC50~)
- - Designed for low speed with high feed condition
- - Suitable for heavy duty and roughing application.
- - Minimize fracturing at high feed by high TRS ultra fine WC grade.
3&4SRM
3&4 Flutes Roughing Endmills
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
2TCR
Taper Neck Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes High Speed Taper Neck Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
4TCR
Taper Neck Corner Radius
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes High Speed Taper Neck Corner Radius Endmills
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - Minimize chattering and fracturing by taper designed flute.
- - Designed for minimizing edge chipping by corner R shape.
- - High precise edge tolerance.
2DPH
Endmills for 3D Cut 230°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
2 Flutes Spherical Endmills for 3D Cut 230°
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPH
Endmills for 3D Cut 230°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 230°
- - Endmills for pre-hardened and hardened steel (HRC50~65)
- - 230°degree ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
4DPM
Endmills for 3D Cut 270°
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
4 Flutes Spherical Endmills for 3D Cut 270°
- - Endmills for pre-hardened and hardened steel (HRC50~62)
- - 270° ball shape for wide range 3D machining.
- - Minimize chattering and fracturing by taper and straight designed flute.
3&4SRM
Roughing Endmills
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes Roughing Endmills
- - Roughing Endmills for tool steel, alloy steel
- - Reduce machining time by excellent chip control.
- - Maximize work efficiency by high speed machining.
3&4HRM
45°Helix Fine Pitch Roughing
Carbon Steels, Alloy Steels, Prehardened Steels, Heat treated steel
3&4 Flutes 45° Helix Fine Pitch Roughing Endmills
- - Roughing Endmills for hard to cut materials, alloy steel, SUS, Inconel and structural steel
- - Long tool life with low cutting force by 45˚ helix design.
- - Fine pitch shape design for high speed roughing application.
